Polyfoam cutters hot wire cutter
About Me
hot wire Polystyrene cutters
This is my new handheld cutter for cutting polystyrene / depron
WITH POWER SUPPLY
TO SEE BOTH THE CUTTERS WORKING GO TO YOUTUBE AND PASTE ALL IN BOLD BELOW
EAN 0660902549894
(NO BATTERIES REQUIRED)
with the same size cutting wire and power supply as my table cutter
it will cut 150mm thick and 140mm deep(not like some it has the full depth of cut ) ,and the cutting temperature is aprox 640f /337c the right heat for cutting polystyrene not like some other cutters that cut at lower temperatures and cut slower.my cutter uses 30g nichrome wire that is stronger and 549894will last longer, and the weight is only 170g, made from aluminium and has a protective PVC covering, There is a red LED to indicate when the cutter is switched on as you can see in the photo, just plug it in and it is ready to cut instantly,
comes with 2 spare cutting wires that just slide on and off if you need to replace them,
as with my other cutter it has 12-month warranty and if you need help I am here 7 days a week.
spare loop end cutting wire are available on my site if needed,they are the same cutting wire used for my table cutters. replacement cutting wire£5 for 5 free post ,or you can make your own
This cutter is made to last, the power supply just plugs in to your wall socket and the output is 5 volt 3 amp CE approved so is safe to use, and you will never need batteries, it will cut as soon as it is turned on,
and is self-tensioning to keep the cutting wire tight (as nichrome wire expands with power on )
made in the UK
And only comes with 3 pin uk plug, but will work in other countries with a plug adapter that cost about £2
Just to let you know you can pay by card on PayPal even without PayPal account
free post on this cutter is UK only
AS with my other cutter this one has protection so cannot be copied
any questions please ask
this is NOT a toy £40 free post to UK
A Store You Can Trust
HOT WIRE CUTTER TWO CUTTERS IN ONE WITH FREE CIRCLE CUTTING JIG
FOR CUTTING Polystyrene foam , Depron , blue and pink xps/Styrofoam
All the shapes in the photos were cut with this cutter
Comes with plug-in power supply 3 pin UK (for outside UK all you need is an adapter that cost about £2)
the photos show what you will receive
and 9 spare cutting wires, plus one fitted for testing
With loop ends that now just slide on and off for easy replacement
7 /30g cutting wire for every day cutting at approx. 640 F
Great for craft work/ model making/cutting cake dummies/ RC planes/ and lots more
This is the original cutter that I designed 5 years ago and are made in the UK
and have been selling on eBay for 5 years
Comes ready to cut, the fence fits across the 300mm
to assist straight edge cutting and angle cuts, and free circle cutting jig that no other cutter has
My cutter has a 15.88mm Diameter aluminium tube cutting frame that can be adjusted for angle cuts,
and the clip that holds it just screws up with thumb nuts (no tools required) to hold it in place
The tabletop is made from the more expensive 10mm PVC to give it more weight to stop it moving when cutting
And the clip that holds the cutting frame to the table is bolted on with two M6 bolts with nuts and thumb nuts,
this is for those of you that want to make a bigger top,
Size is 300mm x 400mm and Can cut 150mm thick x 333mm deep (from cutting wire to back frame)
If you want just remove the cutting frame and you have a freehand cutter that can cut 170mm thick x 333mm deep
FREE UK POST 2 to 3 days /next day post is available at extra cost if required
Spare cutting wire and all other parts are available if needed
replacement cutting wire£5 for 5 free post ,
or direct from address printed on the cutter 10 for £5 free post
(and use same paypal address )
12 MONTHS WARRANTY/ I AM HERE 7 DAYS A WEEK 365 DAY IF YOU NEED ASSISTANCE
This cutter has protection now so cannot be copied
If it is not sold by me it is not one of my cutters
I have NO connection with other sellers of this type of table cutter that look the same
and the description very similar, they are just copies of my design
and do not have the warranty and backup I provide
the cutting wire are longer lasting as the power supply is the correct size for the 30g
For safety reasons i don't advise using any other size of cutting wire
as the 5 volt 3a power supplies used on this type of cutter
Will be overloaded and can burn out very fast
This is not a toy £40 free post to UK
EAN: 0660902549894
Gallery
PAY BY PAY PAL
£40 for table cutter £25 for hand held
polystyrene Hot Wire table Cutters
£35.00
HOT WIRE CUTTER TWO CUTTERS IN ONE WITH FREE CIRCLE CUTTING JIG FOR CUTTING Polystyrene foam , Depron , blue and pink xps/Styrofoam All the shapes in the photos were cut with this cutter Comes with plug-in power supply 3 pin UK (for outside UK all …
SPARE CUTTING WIRES
£5.00
7 Spare cutting wires 7" long 30g Nichrome wire with post
hand held hot wire cutter
£25.00
hand held hot wire polystyren cutter
This is my new handheld cutter for cutting polystyrene / depron WITH POWER SUPPLY (NO BATTERIES REQUIRED) with the same size cutting wire and power supply as my table cutter it will cut 150mm thick and 140mm …