A Store You Can Trust

HOT WIRE CUTTER TWO CUTTERS IN ONE WITH FREE CIRCLE CUTTING JIG
FOR CUTTING Polystyrene foam , Depron , blue and pink xps/Styrofoam
All the shapes in the photos were cut with this cutter
Comes with plug-in power supply 3 pin UK (for outside UK all you need is an adapter that cost about £2)

the photos show what you will receive
and 9 spare cutting wires, plus one fitted for testing

With loop ends that now just slide on and off for easy replacement

7 /30g cutting wire for every day cutting at approx. 640 F
Great for craft work/ model making/cutting cake dummies/ RC planes/ and lots more

This is the original cutter that I designed 5 years ago and are made in the UK

and have been selling on eBay for 5 years

Comes ready to cut, the fence fits across the 300mm

to assist straight edge cutting and angle cuts, and free circle cutting jig that no other cutter has

My cutter has a 15.88mm Diameter aluminium tube cutting frame that can be adjusted for angle cuts,

and the clip that holds it just screws up with thumb nuts (no tools required) to hold it in place
The tabletop is made from the more expensive 10mm PVC to give it more weight to stop it moving when cutting

And the clip that holds the cutting frame to the table is bolted on with two M6 bolts with nuts and thumb nuts,

this is for those of you that want to make a bigger top,

Size is 300mm x 400mm and Can cut 150mm thick x 333mm deep (from cutting wire to back frame)

If you want just remove the cutting frame and you have a freehand cutter that can cut 170mm thick x 333mm deep

FREE UK POST 2 to 3 days /next day post is available at extra cost if required

Spare cutting wire and all other parts are available if needed

replacement cutting wire£5 for 5 free post ,

or direct from address printed on the cutter 10 for £5 free post

(and use same paypal address )

12 MONTHS WARRANTY/ I AM HERE 7 DAYS A WEEK 365 DAY IF YOU NEED ASSISTANCE
This cutter has protection now so cannot be copied

If it is not sold by me it is not one of my cutters

I have NO connection with other sellers of this type of table cutter that look the same
and the description very similar, they are just copies of my design
and do not have the warranty and backup I provide
the cutting wire are longer lasting as the power supply is the correct size for the 30g

For safety reasons i don't advise using any other size of cutting wire
as the 5 volt 3a power supplies used on this type of cutter
Will be overloaded and can burn out very fast
This is not a toy £40 free post to UK